400G DR4 QSFP-DD PAM4 1310nm 500m DOM MTP/MPO-12 APC SMF Optical Transceiver Module
400G DR4
The 400GBASE-DR4 module, MTP/MPO-12 connector, up to 500m over parallel single-mode fiber. It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G. It is a cost-effective and lower power consumption solution for 400GBASE data center.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G. It is a cost-effective and lower power consumption solution for 400GBASE data center.
Quantity
Product Highlights
● Built-in Inphi Chip, Max. Power Consumption 10W
● Tested in Targeted Switches for Superior Performance, Quality, and Reliability
● Compliant with QSFP-DD CMIS Rev4.0, QSFP-DD MSA HW Rev 5.1
● Support 4x100G Breakout to QSFP28-DR-100G
● Support Real-time Configuration
● Hot Pluggable QSFP-DD Form Factor
● High-speed Electrical Compliant to IEEE 802.3bs
● QSFP-DD port is backward compatible with QSFP+, QSFP28 and QSFP56 modules
| Form Factor | QSFP-DD | Max Data Rate | 425Gbps (4x106.25Gb/s) |
| Wavelength | 1310nm | Max Cable Distance | 500m |
| Connector | MTP/MPO-12 APC | Media | SMF |
| Modulation Format | PAM4 | Receiver Type | PIN |
| TX Power | -2.9~4.0dBm | RX Power | -5.9~4.0dBm |
| Powerbudget | 3dB | Modulation | 8x 50G PAM4 |
| Typical Power Consumption | ≤10W | Extinction Ratio | 3.5dB |
| DDM/DOM | Supported | Temperature Range | 0 to 70°C (32 to 158°F) |
| BER | 2.4x10^-4 | Inbuilt FEC | No |
| Protocols | IEEE 802.3bs, QSFP-DD CMIS Rev 4.0, QSFP-DD MSA HW Rev 5.1 | Warranty | 5 Years |
| 400Gb/s QSFP-DD Series Optical Transceiver | |||||||||
| Product | Package | Data Rate | Wavelength | Reach | TX | RX | Connector | TX Power | RX Sensitivity |
| QSFP-DD SR8 | QSFP-DD | 200G | 850nm | 100m | VCSEL | PIN | MPO | -6~4dBm | -6.5dBm |
| QSFP-DD LR4 | QSFP-DD | 200G | LWDM4 | 10km | EML | PIN | LC | -2.8~5.3dBm | -7.1dBm |
| QSFP-DD DR4 | QSFP-DD | 200G | 1310nm | 500m | EML | PIN | MPO | -2.9~4dBm | -4.4dBm |
| QSFP-DD FR4 | QSFP-DD | 200G | 1310nm | 2km | EML | PIN | MPO | -3.2~4.4dBm | -4.6dBm |
Comprehensive Testing Increases Reliability
Qualified through a rigorous process with advanced equipments to ensure you get the high quality and reliable optics.
How can we help?
For more information about our fiber optical equipment, please contact us and you will enjoy our excellent service and latest promotions! We are very confident we will tie closer relationships with you for our long terms cooperation and mutual benefit.
Shenzhen Wolck Network Product Co.,Ltd
9# BanTian LongBi Industry Area, ShenZhen, China
(86)-0755-84192885
sales4@wolck.cn
